Instructions MTK6577 USB VCOM Driver Installation for all android mobile

Since here every day again and again problems with the USB VCOM driver installation for MTK6577 appear Phones, here is a short guide to the installation, and a final, successful test with SPFlashtool!


Installation of the USB VCOM driver:

[1] With USBDeview, clean up your PC from all possible old MTK VCOM entries, then reboot your PC.



[2] Smartphone is switched off, and still dont connect via USB to the PC.

[3] Open Device Manager and leave it open!

[4] Your switched off Smartphone with inserted rechargeable battery via USB connect now on the PC, you should now see a MT65xx preloader in the Device Manager.
(With some MTK6577 Smartphones should be installed without battery. Please before hand inform.)



[5] now launch the Installdriver.exe from the unzipped MT6577 USB VCOM drivers folder. Confirm the installation of unsigned drivers




[6] now! (W7 x 64 this confirmation comes later in the manual installation!) After the installation is complete, you have no entry in the Device Manager, it is correctly!




[7] PC reboot!

[8] Open Device Manager and open the switched-off Smartphone via USB to the PC release, now connect (same USB port!)

[9] Now a MediaTek PreLoader USB VCOM should appear for a brief moment in the Device Manager entry!



[10] At the moment the entry double click and click on "Update driver" under the tab "Driver".

[11] With the wizard in the unzipped MTK 6577 USB VCOM drivers navigate and select the folder for your operating system.

Quote:

Required Downloads:
Download MT6577 USB VCOM Driver (W7/Vista/XP) -> https://userscloud.com/tqkxoo1gum9i
Download MT6577 USB VCOM Driver (W8) -> http://www.mediafire.com/?7yee2of64nhl947
Download USBDeview -> http://www.mediafire.com/?becpnj761zh5o2w
Download USBDeview x64 -> http://www.mediafire.com/?41i2k36yyi1fzhz

Tweet